Description
AG7110 and AG7111 series provide a switch functionality that allows up to three HDMI, DVI or DisplayPort Dual-Mode video streams to be transported to one display sink device.
HDMI is compliant with HDMI 1.4b Specification and supports up to 4096x2160/30Hz resolution. DisplayPort Dual-Mode (DP++) is compliant with DisplayPort Dual-Mode Standard Version 1.1 and fully supports HDMI 1.4 video modes and 1080p deep color. DVI supports up to 1920x1200/60Hz resolution. The maximum supported TMDS clock rate is 340 MHz and the maximum total throughput is 8.16 Gbps (2.72 Gbps/channel).
AG7110 series supports longer cable length, whereas AG7111 series provides better noise immunity for cascade architecture.
Key Features
- HDMI™, DVI, DisplayPort™ Dual-Mode
- HDMI™ 1.4b compliance
- DisplayPort™ Dual-Mode 1.1 compliance
- Up to 340 MHz TMDS clock rate
- Up to 4096x2160/30Hz resolution
- Support AC coupling for DisplayPort Dual-Mode and DC coupling for HDMI.
- Support integrated 50-ohm termination resistors for high-speed input signals
- Support auto equalization and signal extension for long cable lengths
- Support automatic input selection of HDMI
- Support automatic suspend mode by output detection
- Support manual selection between active inputs
- Support external controller for input selection
- Support LED control by GPIO for indication
- Embedded RC oscillator (Crystal-less)
- Embedded LDO regulator from 5V to 3.3V/1.2V
- Operating characteristic
- Operating voltage: 3.15V to 5.5V
- Temperature range: 0°C to 70°C
- ESD: HBM 8 kV
- LQFP-48L 7x7x1.6 mm3 package
Application